2.4 KB • ⤓ Micron 2.4 KB • ⤓ HTML 17.9 KB

The LILYGO T-Deck is a device based around the ESP32-S3FN16R8 microcontroller and the SX1262 LoRa transceiver. It features an IPS display, a trackball, and a keyboard.

• Models

• Firmware

• References

• External links

The T-Deck comes in two variants. One features a LoRa module labeled with 433/470, while the other is labeled with 868/915. While these labels indicate the approximate frequency ranges they operate on, the exact supported ranges are not listed.

There is also an upgraded model, known as the T-Deck Plus, which features a GNSS module, a 2000 mAh LiPo battery, and a case to contain everything. The T-Deck Plus comes in both frequency variants.

The T-Deck is supported by the official RNode firmware as of version 1.76.cite-ref-1[1] It is also supported by the microReticulum firmware as of version 1.85.10.cite-ref-2[2] Additionally, there are firmware projects dedicated specifically to the T-Deck, including Pyxis and rsDeck.

cite-note-11. ↑ "Release 1.76".

cite-note-22. ↑ "Release 1.85.10".

• T-Deck

• T-Deck Plus

• T-Deck

• T-Deck Plus

Manufacturer: LILYGO

Type: Mobile device

Price: US$46.52

MCU: ESP32-S3FN16R8

CPU: Xtensa LX7 @ 240 MHz

Memory: 512 kB SRAM 8 MB PSRAM 16 MB Flash TF Card Slot

Display: 2.8-inch IPS TFT LCD 320 × 240 px

Input: QWERTY Keyboard, Trackball

GNSS: Optional MIA-M10Q

Power source: 5 V USB Type-C 3.7 V

Dimensions: 100 × 68 × 11 mm

Transceiver IC: ESP32-S3FN16R8

PHY modes: 2M, Coded

Output power: 20 dBm (100 mW)

Sensitivity: -98 dBm @ 1 Mbps

Antenna type: Shared PCB Trace

Transceiver IC: ESP32-S3FN16R8

PHY modes: IEEE 802.11b/g/n

Output power: 21 dBm (125 mW)

Sensitivity: -98 dBm @ 1 Mbps

Antenna type: Shared PCB Trace

Transceiver IC: SX1262

PHY modes: FSK, LoRa, LR-FHSS

Frequency range: 433/470 MHz or 868/915 MHz

Output power: 22 dBm (160 mW)

Antenna type: External u.FL